NEWS
- Company News
- Kefid's impact crusher models
- Kefid single-cylinder hydraulic
- The equipment configuration and
- The future development of minin
- K series tire mobile crusher
- Bauma China 2020: Three new pro
- Basalt sand and gravel producti
- The crushing mechanism of impac
- The use of coal gangue and crus
- 325 mesh calcium carbonate powd
- Industry News
- The maintenance measures that i
- The standard of mechanism sand
- The technological processes of
- The technical advantages of Eur
- Concrete blocks recycling to bu
- A powerful tool for processing
- Stone crusher for railway proje
- The selection of crushing cavit
- The advantages of mobile sand m
- The solution to prevent corrosi
- Exhibition
- Special Report
- Faq
- How to maintain the production
- How to configure equipment for
- The composition of cement raymo
- I want to buy a coal mill with
- What equipment is needed for th
- What are the complete sets of e
- Regarding the waste disposal af
- What is the price of sand washe
- How much are the accessories of
- What is the reason for the slow
Why should we strictly control the moisture content of the grinding material?
Asker: ArunAsk date: 2/21/2019 02:51:01PM
Question: Why should we strictly control the moisture content of the grinding material?
Reply:
Dear Arun,
In order to ensure the normal operation of the mill and improve the output of the mill and the quality of the finished product, the moisture of the material must be strictly controlled. When the moisture content of the material is large, the blockage occurs, and the fine powder in the mill adheres to the grinding body and the lining plate, so that the grinding efficiency is lowered, and in severe cases, the boring of the ventilating plate is blocked, resulting in poor ventilation of the milling machine. The material is difficult to pass, the output drops sharply, and the quality also causes large fluctuations.
According to the production experience, the moisture content of various materials can be controlled within the following range: limestone <1%, clay <2%, iron powder <8%, mixed material <2%, gypsum <8%, clinker <0.5% , coal <4%, comprehensive moisture control within 1.5%.
Regards!
Kefid
Kefid